Lighting University

Application Bundles - Training Tool

Classroom

Dedicated Application Bundle for Classroom

Presence detector LRM1000

  • Do not position close to air ventilation, curtains or heating outlet, as air flow can trigger motion sensor
  • Do not position too close to a door, as sensor might detect motion outside when door open
  • Extend sensor hold time in case lights switch off annoyingly whenever users are seated without moving
  • When positioning sensor, keep in mind it best detects motions when it occurs straight under it.

Recommended for optimal energy saving and practical usage:

One group of luminaires connected to 2 sensors. All luminaires will react the same on movement.

Detection coverage diagram

Presence Detector LRM1000
Detecting range at 2,8m height Ø 5 - 12 m
Recommended mounting height 2 m - 4 m
Switch off delay 10 sec - 5 min
Number of luminaires on one control ≤ 15
Get Certified! Next Previous

© Koninklijke Philips N.V., 2015. All rights reserved. Any unauthorized reprint or use of this material is prohibited. No part hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system without express written permission from the owner.